OPT three-in-one multifunctional hair removal instrument

 

Summer is coming. Every girl likes to travel lightly, but they are troubled by the exposure of indecent body hair. Long body hair grows on armpits, arms, and slender legs. Excessive hair not only affects women. The external beauty of women brings psychological harm to women to a greater extent. For this reason, some simply shave it off, while others use methods such as "hair removal cream" or drug hair removal, but the result is more and more hair loss, making it darker and denser than before.

So how can hair removal be safer, healthier and more effective? Mu Ning International Beauty Equipment introduces the most advanced OPT painless hair removal equipment to help you solve your troubles and make your beautiful summer without regrets.

What is opt?

OPT Perfect Pulse Light is an intelligent, non-ablative skin reconstruction system that integrates epidermal cooling technology, IPL treatment technology and RF radio frequency technology. Core technology OPT, the fourth generation IPL, perfect pulse technology achieves uniform energy balance throughout the pulse, professional sapphire cooling technology improves the effectiveness and safety of treatment, OPT perfect pulse light intelligently combines the above three technologies to target different skin types Provide targeted treatment plans for different patients' skin problems. Under the premise of fully protecting the epidermis (epidermal cooling technology), IPL technology can be used to uniquely cleave the epidermis; the intelligent combination (IPL+RF) allows the above two energies to maximize the focus on the spot-like pigment clusters and pigments of the epidermis. The collagen tissue of the dermis and the dermal papilla of the hair follicle. RF technology provides an energy that evenly heats almost the entire skin layer. At this time, combined with the selective photothermal principle of IPL, it can strengthen the effects of skin rejuvenation, freckle removal and hair removal, and easily achieve skin reconstruction and depilation without obvious pain and side effects for the patient. Hair removal.
OPT's excellent technical advantages avoid adverse postoperative reactions such as photons, colored light, and E-light, such as blisters, light spots, and pigment reflux. It is the safest, most reliable, and most cost-effective option for beauty salons, plastic surgery institutions, and hospitals. Required equipment.

What is IPL

Intense pulsed light, referred to as IPL, is a broad-spectrum visible light with a special wavelength and a softer photothermal effect. Initially, it was mainly used in dermatology clinical treatment for skin telangiectasia and hemangiomas.
Intense pulsed light is a continuous, multi-wavelength incoherent light with a wavelength range of 500 to 1200 nm. The intense pulsed light therapy device can select the wavelength through the filter, so it has the effect of selectively removing pigment spots, occluding blood vessels, removing hair and wrinkles. When intense pulsed light is used to treat skin wrinkles, pigmentation, telangiectasia and other changes caused by photoaging, this technology is also called photorejuvenation.

Selective absorption of light + strong heat of light
Multi-wavelength, strong pulse, wide spectrum, the colored light will form light quanta after quantitative decomposition. After irradiating the skin with the quantified and decomposed light quanta, it can reach all layers of the skin, decompose abnormal pigment cells, destroy hair follicles, close abnormal blood vessels, and stimulate at the same time Collagen proliferates and elastic fibers are rearranged to achieve the effects of freckle removal, ER nano-light hair removal, red blood filament removal, and skin whitening and rejuvenation. Freckle removal relies on metabolism to take abnormal pigments out of the body.
effect:
Anti-wrinkle - effectively eliminate and relieve wrinkles of varying degrees on the eyes, forehead, etc.;
Skin rejuvenation - shrink pores, improve skin texture, and increase skin elasticity;
Skin tightening - improve skin elasticity and increase skin smoothness;
Whitening - remove freckles, age spots, acne, etc., decompose melanin, and make skin white.

Advantages of OPT three-in-one hair removal device

Hair removal advantage 1
Safe and comfortable: Traditional laser hair removal will be very painful during treatment. Because the laser has high brightness and high energy density, the radiation treatment is similar to a concentrated exposure of the skin. In order to prevent epidermal damage, freezing point hair removal has a special cooling device, so The process of freezing point hair removal is almost painless!
Hair removal advantage 2
Optimum pulse, no hair removal and no damage to the skin: The pulse required for the freezing point hair removal effect is related to the thickness of the hair. The thicker the hair, the longer the action required. The laser pulse for hair removal ranges from 5 milliseconds to 100 milliseconds to obtain the ideal leg hair removal effect. At the same time, it effectively protects the skin from heat damage.
Advantages of hair removal 3
Directly attack the hair root and never regenerate: This method of hair removal can penetrate the epidermis and enter the dermis, completely shrinking the hair follicles and hair shafts, resulting in permanent hair removal. The other areas around the hair follicles do not contain melanin particles, so they do not absorb this laser and will not cause harm, making it safer and more thorough.
Advantages of hair removal 4
The effect is immediate: the freezing point laser wavelength can penetrate into the deep layers of the dermis and subcutaneous fat tissue, act on hair follicles in different parts and depths, and quickly and completely remove hair in any part and depth of the human body.
Advantages of hair removal 5
No pigmentation: Traditional laser hair removal causes skin pigmentation and inflammation after hair removal. However, the nearly perfect function of freezing point laser hair removal is deeper and the epidermis absorbs very little energy, so no pigmentation will occur. .
Advantages of hair removal 6
Smooth and delicate skin: Freezing point hair removal has the effect of skin rejuvenation. With the proliferation of collagen under the skin, the pores after hair removal will tighten, and the skin of the body parts after hair removal will become smooth and shiny.

working principle

Body hair follicles contain a large number of melanocytes that absorb light in specific bands. Therefore, using the selective photothermolysis principle of the patented strong pulse light source, the multi-functional OPT beauty instrument is particularly sensitive to melanocytes in hair follicles without damaging the normal epidermis. The light irradiates the hair follicles to generate heat and selectively destroys the hair follicles. At the same time, the emitted heat is conducted to the deep part of the hair follicles through the cross section of the hair shaft, causing the temperature of the hair follicles to rise rapidly. The structure of the hair follicles is irreversibly damaged, and the damaged hair follicles are damaged. Hair and hair follicles are removed through a natural physiological process to achieve permanent hair removal while avoiding damage to surrounding tissue.

The difference between traditional hair removal

Hair removal with the OPT freezing point hair removal device is different from traditional hair removal, which relies on foreign object coupling agent or cold gel to achieve a rapid local cooling effect. Freezing point hair removal is completely unnecessary, which also greatly reduces operating costs for beauty salons in the future. The original sapphire probe acts directly on the epidermal skin, which can instantly make the subcutaneous skin temperature reach -4°C, achieving true freezing point painless hair removal.

Compared with the shortcomings of other traditional hair removal methods, the freezing point hair removal effect of OPT hair removal equipment is more convenient, more comfortable, and has fewer side effects, which can also be understood as no side effects. It can remove hair of different thicknesses at one time, whether it is fine lip hair, facial hair, or thick hand hair, leg hair, chest hair, or even the bikini line in your private parts, it can be easily removed for you. The OPT device The hair removal process is comfortable, with almost no pain and only a slight stinging sensation, which is almost negligible. These advantages are unmatched by traditional methods such as electroacupuncture or wax hair removal.


Instrument accessories


HR probe operation items
Freezing point hair removal (hair removal):
The perfect pulsed light wavelength of 530nm-1200nm is used to act on human skin and hair at different depths. The filtered pulsed light is easily absorbed by the melanin in the hair and hair follicles and converted into heat energy. The heat energy causes the hair shaft and hair follicles to rapidly heat up. When the temperature reaches When the temperature is above 60°C, it will cause hair splitting, hair follicle degeneration, dermal papilla destruction, hair growth cell death, and eventually the original hair will fall off, and new hair growth will be delayed, thinned, lightened, or even stopped. But it does not affect sweat glands.


Operation time: 20 minutes, 30 days/time
For small area hair removal (such as liquid hair, lip hair, hairline), apply gel, stick the probe close to the skin, press the light button once, move the beam to the next place, and press it again, like stamping,
1. Adjust the energy until the client feels a tingling sensation and the client's skin becomes slightly red for the best effect. Apply approximately 5-7 times.
2. Do not stay on the same place on the skin and hit continuously.
3. The probe must be close to the skin, otherwise it may be too hot due to virtual contact.
Apply gel to large parts of the body for hair removal (such as arm hair, chest hair, and leg hair), put the probe close to the skin, keep pressing the light button on the handle, and slide it on the skin in order. You can use the cross method, apply horizontally, and then apply vertically,
After the hair removal operation, the hair follicles will not change much from what they were before the operation. That is to say, you will see that the burrs are still there, but don’t worry, the hair will become shorter, thinner and more repetitive after a month. No more hair will grow after just one treatment.
SR probe operation items
1. Freckle removal
l Perfect pulsed light waves act on the skin. Since the pigment group content in the diseased tissue is much higher than that of the normal skin tissue, after absorbing the pulsed light, the light energy absorbed by the diseased tissue is much higher than that of the normal skin, and the pigment breaks down and decomposes. Because the normal skin tissue It absorbs less light and heat without damaging normal skin tissue. The light-absorbing melanin will cause scabbing on the epidermis in the later stages.
Note: It can only treat epidermal spots such as freckles, sun spots, and age spots.
Deep spots: chloasma, nevus of Ota, and mother spots on the cheekbones cannot be treated because the light emitted by OPT is scattering, and the flaky spots will absorb light over a large area. It is recommended not to do it, or use point-to-point laser to remove it, such as picosecond laser.
Operation time: 30 minutes, 45-60/time, 3 times/course of treatment
(1) Remove makeup for 2 minutes (mild makeup remover)
(2) Cleanse for 2 minutes (moisturizing cleanser)
(3) Be sure to analyze the spots first. Only dot-type spots on the epidermis, such as freckles and sun spots, can be done (skin detector) for 5 minutes.
(4) Apply gel, stick the probe to the spotty skin, press the light button once to move the beam to the next place and press it again, like a stamp, (gel) for 10 minutes
Note: Adjust the energy until the client feels a clear tingling sensation. Stop until the client's skin becomes a little red and the spots are darker than before. For best results, only operate the areas with spots.
(5) After the operation is completed, wipe the gel clean and apply a facial mask. You can apply repair water and repair cream (regenerate repair water and repair cream) for 2 minutes.

2. Photorejuvenation (for dark yellow, oily skin with large pores)
l Utilizes perfect pulsed light combined with RF radio frequency with a depth of up to 15MM to stimulate the fibroblast tissue of the dermal layer of the skin. The energy provided by RF technology almost evenly heats the entire skin layer, promotes collagen proliferation, achieves skin rejuvenation and whitening, shrinks pores, and improves facial sagging. ;
Operation time: 45 minutes, 3 times/course, 30 days/time
(1) Remove makeup for 2 minutes (mild makeup remover)
(2) Cleanse for 2 minutes (moisturizing cleanser)
(3) Apply gel, press the light-emitting button once, move the beam to the next place and press it again, like stamping, operate the entire face, 15 minutes (gel)
Note: The light spot cannot be applied to the eyebrows, eyes, or lips. It can only be applied to the skin that can be operated.
(4) Adjust the energy until the customer feels a tingling sensation for the best effect. Operate the entire face about 5 times.
(5) After the operation, you can apply a moisturizing mask for 20 minutes (EGF mask)
(6) Apply 8 water, regenerating essence, moisturizing lotion, regenerating face cream, revitalizing eye cream, and sunscreen for 2 minutes
After that, you can put on your makeup normally
3. Assist in acne removal
l Use light energy of designated wavelengths to reduce active propionibacteria in sebaceous glands while eliminating pigmentation and stimulating deep collagen proliferation, thereby achieving a good effect in treating acne.
Preoperative examination work

l Ask guests if they have photosensitivity. A small number of people will become red, swollen and itchy when exposed to the sun. This phenomenon cannot be used with optical instruments;

Photon treatment can only be performed on the same area once per month. Do not repeat treatment within one month;
Freckle removal cannot be performed on people with scarring constitution. There will be tiny scabs on the skin after the freckle removal with optical instruments;
The treatment light should avoid reflective mirrors and eyes. Do not wear jewelry, watches and other accessories during treatment;
Open wounds, cystic acne, densely red blood cells, moles, and pigmented flakes on the face are prone to injury, so do not operate or avoid them;
Do not do this if you have severe three highs (hyperlipidemia, high blood pressure, high blood sugar) or three periods (menstrual period, pregnancy, lactation period);
People with serious illnesses, such as heart disease, pacemakers, or diabetes will not do this;
Not suitable for allergic skin, vitiligo, lupus and other skin diseases;
Facial plastic surgery is bypassed;
Treatment is not recommended for those who have used other methods of hair removal (such as wax removal) within 6 weeks;
Do not do this if you have had an explosion in the past 10 days or so.
Treatment is not recommended for those who have used other methods of hair removal (such as wax removal) within 6 weeks;
Do not do this if there has been an explosion in the past 10 days or so.

Tuning parameters

The core of parameter adjustment: The adjustment of parameters is a step-by-step process from shallow to deep based on the customer's feelings, so as to maximize the safety effect; for pigment problems, the main method is to adjust energy, and for skin rejuvenation problems, the main method is to adjust energy and RF. Guests with too high energy cannot accept it as it may cause burns, so remember!
Professional mode



First pulse: pulse width: refers to the duration of each sub-pulse of millisecond (ms)-level pulse light (heat penetration time), referred to as pulse width. The longer the pulse width, the deeper the heat penetrates, but the less heat is distributed across a single layer of skin. The first value is the first pulse, which refers to the width of the first pulse in the pulse train, and the following two values are sub-pulses.
Pulse delay: also known as pulse interval, refers to the time interval between sub-pulses, in milliseconds (ms); the longer the pulse delay, the more complete the skin cooling, but the temperature of the lesion will also decrease.
Number of pulses: refers to the number of sub-pulses contained in the pulse train

Course of treatment

project
Course of treatment/course of treatment
Intervals
Hair removal (fine hair)
5-8 times
1-2 months/once
Hair removal (coarse hair)
4-6 times
1-2 months/once
Photorejuvenation
3 times
1 piece/time
Freckle removal
3 times
45-60 days/time

Operating procedures
1. The machine needs to be preheated for 3 minutes before operating the probe. The machine needs to run the water circulation cooling system to cool down the treatment head (frost or water droplets condense).
2. Clean the probe, first disinfect it with wine liquor, and then wipe off the liquor liquor component with physiological saline
3. Shaving (don’t shave too cleanly, a little bit of burr will absorb the hair better)
4. Wear protective glasses for guests and special light-blocking glasses for operators
5. Apply gel, about one coin thick, which can relieve heat, guide light and lubricate

Postoperative care

1. After treatment, the client should stay and observe for 10 minutes. If there is obvious burning sensation, you can use an ice pack to apply ice to the client.
2. Instruct customers to stay indoors as much as possible within a month and not to bask in the sun (because after finishing the optical instrument, it is equivalent to being exposed to a very strong light, the sun is also light, and absorbing light again will cause damage to the skin). Use an umbrella when going out, and wipe the Sunscreen with SPF30 or above.
3. Do not use saunas for one week after treatment, do not touch overheated hot water when soaking in hot springs or operating parts, and pay attention to ventilation and heat dissipation.
Do not put on makeup for a day or two after the scabs have fallen off. Do not apply any cosmetics to the treatment area during the scab period. Stop using skin care products and other freckle removal products within three months of the freckle removal project.
4. For freckle removal, avoid eating spicy, seafood, pigmented, photosensitive foods and other irritating foods.
5. Do not touch water for 3-4 days during freckle removal, and pay attention to cleaning (wipe with saline or distilled water to keep the treated area clean and fresh)
6. After one week of freckle removal, if you feel itchy during the scab period, do not use your hands to clasp or scratch it, and let the scabs fall off naturally.
7. During the scab removal period of one week, no sauna or strenuous exercise is allowed.
8. Do hydrating care (such as applying facial mask) ten days after removing freckles

Warning statement
1. If the machine has been working for more than 2 hours, shut it down and let the instrument rest for 20 minutes.
2. The probe handle can be used 100,000 times. When the number of rounds is used up, you can contact our company to purchase the gun tip.
3. Strong light hazard warning refers to the strong light emitted from the front of the treatment head irradiating the eyes, which is prone to danger; the operator is required to wear protective glasses during operation and protect the person being operated to avoid direct exposure of strong light to the human eyes.
4. The instrument water tank must be filled with water before use.
5. When you need to change different function options, the machine must be in standby mode (the standby button is red). Function options cannot be changed in the ready state.
[Statement]: Low temperature areas below 0℃
6. If the instrument is not used for a long time or needs to be used in a different location, the water inside (handle and main unit) must be drained.
7. Try not to leave the instrument in an environment below 0°C for more than 3 hours. Research has found that water below 0°C will 'swell' when moved, and is specifically transformed into liquid water below 0°C. Rapid freezing occurs during movement. After liquid water turns into solid ice, its volume increases rapidly, causing certain damage to components such as water pipes, cooling fan internal waterways, and laser waterways.